Insulation Powder Coating in India

Insulation Powder Coating Manufacturer in Chennai – Sri Lakshmi Industrial coating provide electrical insulation and environmental protection in a broad array of applications including motor iron, bus bars, torpid cores and passive devices such as capacitors and resistors.

Our epoxy powders are manufactured to strict quality standards for environmental, health, and safety compliance. Plus, they are easy to use. Powder coatings minimize VOCs and enable precise and uniform surface coverage.

What is insulation coating?

Thermal insulating coating (n): a liquid or semi-liquid, suitable for application to a surface in a thickness of 30 miles (0.75 mm) or less per coat, that dries or cures to simultaneously form a protective finish and provide resistance to heat flow.

Guru Metachem is Largest Manufacturer & Exporter of Radex Insulation Powder & Expandable Heat Insulation Compound(Radex). Use of Insulation Material to Maintaining Temperature in Ladles &Tundish in Steel Plants.
Manufacturers need supplier partners that are reliable and able to demonstrate effective management of modern requirements. Our business systems and our products have been recognized by leading authorities as highly effective.

Advantages over Insulation powder coating processes

Powder coatings contain no solventsand release little or no amount of volatile organic compounds (VOC) into the atmosphere. Thus, there is no need for finishers to buy costly pollution control equipment.
Companies can comply more easily and economically with environmental regulations, such as those issued by the S. Environmental Protection Agency.
Powder coatings can produce much thicker coatings than conventional liquid coatings without running or sagging.
Powder coated items generally have fewer appearance differences than liquid coated items between horizontally coated surfaces and vertically coated surfaces.
A wide range of speciality effects are easily accomplished using powder coatings that would be impossible to achieve with other coating processes.
Curing time is significantly faster with powder coatings compared to liquid coatings especially when using ultraviolet cured powder Coatings or advanced low bake thermosetting powders.

What is 7 times process in powder coating?

7 Tank Process for Powder Coating on Metal is a seven steps process. These are steps which include Degrease, Rinse, Pickling, Rinse, Phosphating, Rinse, and Passivation. Sometimes we use Activator before Phosphating. We also know it as a Zinc Phosphating Process.

Which insulation is best and 5 examples of insulation

Closed-cell foam is the most effective, with an insulation value of around R-6.2 per inch of thickness. Open-cell foam cells are not as dense and are filled with air, which gives the insulation a spongy texture. Open-cell foam insulation value is around R-3.7 per inch of thickness.